Concluding Work - Froling S1 Turbo Installation Instructions Manual

Fire wood boiler

Hide thumbs Also See for S1 Turbo:

Table of Contents

Assembly

Electrical connection and wiring

4.7.2 Concluding work

Installation Instructions S1 Turbo | M1470113_en

CAUTION

When using high efficiency pumps without an additional control line at speed-con‐

trolled pump outputs:

Malfunctions of the boiler, the pump and the hydraulic system may occur!

Therefore:

❒ Do not connect EC motor pumps without a control line to the speed-controlled

pump outputs of the boards.

➥ Only use special high efficiency pumps with a connection option for a con‐

trol line (PDM/0-10V)!

➥ Observe the additional instructions and information on board outputs in the

operation instructions for the boiler controller.

❒ Attach the covers to the controller cable ducts

❒ Put on the controller lid

➥ Insert the lid attachment hooks into the holes provided on the controller

❒ Secure the controller lid with the screw

❒ Switch on the main switch on the side of the controller box

Table of Contents

Do you have a question about the S1 Turbo and is the answer not in the manual?