Windscreen Defrosting And Defogging (Auto); Sunlight/Temperature Sensor - Mazda 6 Owner's Manual

Interior Features
Air-Conditioning System
To turn off the system, press the OFF
switch.
NOTE
Setting the temperature to maximum
hot or cold will not provide the
desired temperature at a faster rate.
When selecting heat, the system will
restrict air ow until it has warmed to
prevent cold air from blowing out of
the vents.
Windscreen Defrosting and
Defogging
Press the windscreen defroster switch.
In this position, the outside air position
is automatically selected, and the air
conditioner automatically turns on. The
air conditioner will directly dehumidify
the air to the front windscreen and side
windows on page 5-4 .
Air ow amount will be increased.
WARNING
Set the temperature control to the hot
or warm position when defogging
( position):
Using the position with the
temperature control set to the cold
position is dangerous as it will cause
the outside of the windscreen to fog up.
Your vision will be hampered, which
could lead to a serious accident.
5–12
NOTE
Use the temperature control dial to
increase the air ow temperature and
defog the windscreen more quickly.

Sunlight/Temperature Sensor

Sunlight sensor
Do not place objects on the sunlight
sensor. Otherwise, the interior temperature
may not adjust correctly.
Sunlight sensor
Interior temperature sensor
Do not cover the interior temperature
sensor. Otherwise, the interior temperature
may not adjust correctly.
Interior temperature sensor