Function For Cancelling Illumination Dimmer; Outside Temperature Display (Without Multi-Information Display) - Mazda 6 Owner's Manual

NOTE
(With auto-light control)
When the ignition is switched ON
in the early evening or at dusk, the
instrument panel illumination is
dimmed for several seconds until the
light sensor detects the brightness
of the surrounding area, however,
the dimmer may cancel after the
brightness is detected.
When the position lights are turned
on, the position lights indicator light
in the instrument cluster turns on.
Refer to Headlights on page 4-70 .
The brightness of the instrument cluster
and instrument panel illuminations can be
adjusted by rotating the knob.
The brightness decreases by rotating the
knob to the left. A beep sound will be
heard when the knob has been rotated to
the maximum dim position.
The brightness increases by rotating the
knob to the right.
Dim
Bright
Instrument Cluster and Display
Function for cancelling illumination
dimmer
The illumination dimmer can be
cancelled by rotating the instrument panel
illumination knob to the right until a beep
sound is heard while the instrument cluster
is dimmed with the ignition switched
ON. If the instrument cluster's visibility
is reduced due to glare from surrounding
brightness, cancel the illumination
dimmer.
NOTE
(With Multi-information Display)
The illumination dimmer can be
cancelled by pressing the instrument
panel illumination knob.
When the illumination dimmer is
cancelled, the instrument cluster
cannot be dimmed even if the
position lights are turned on.
When the illumination dimmer is
cancelled, the screen in the centre
display switches to constant display
of the daytime screen.
Outside Temperature Display
(Without Multi-information
Display)
When the ignition is switched ON, the
outside temperature is displayed.
When Driving
4–29