Mazda 6 Owner's Manual page 506

Interior Features
Bluetooth
®
Device selection
If several devices have been paired, the
Bluetooth unit links the device last
®
paired. If you would like to link a different
paired device, it is necessary to change the
link. The order of device priority after the
link has been changed is maintained even
when the ignition is switched off.
1. Using the audio control dial, select the
link change mode " LINK CHANGE "
in the " BT SETUP " mode. (Refer to
"Bluetooth audio device set-up" for
®
details.)
2. Press the audio control dial to
determine the mode.
3. The name of the currently linked
Bluetooth audio device is displayed.
®
If no Bluetooth
®
currently linked, the name of the rst
device among the paired devices is
displayed.
4. Turn the audio control dial to select the
name of the device you would like to
link.
5–98
audio device is
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
5. Press the audio control dial to select the
device you would like to link.
The " " symbol disappears, and
" PAIRING " ashes in the audio
display.
NOTE
When " GO BACK " is selected and the
audio control dial is pressed, the display
returns to " LINK CHANGE ".
6. If the link to the desired device is
successful, the " " symbol is displayed
again, together with " LINK
CHANGED ". " LINK CHANGED " is
displayed for three seconds, then it
returns to the normal display.