Mazda 6 Owner's Manual page 750

Speci cations
Personalisation Features
Item
Fuel Economy Monitor (page 4-103 )
Ending display Display/non-display
Fuel economy
Linkage/non-linkage with fuel economy reset
resetting
and trip meter A reset
procedure
Active Driving Display (page 4-43 )
Setting can be changed so that the Active
Driving Display is not displayed.
The display height (up/down position) can be
changed.
The method for adjusting the display brightness
(automatically/manually) can be changed.
Display
The standard brightness with the automatic
brightness adjustment can be changed.
The standard brightness with the manual
brightness adjustment can be changed.
Navigation
The display information can be changed.
guidance
*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends
that these systems remain On.
*2 For vehicles with an audio system other than the on-screen function type, the warning sound cannot be changed.
The warning sound is only a beep.
*3 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The
volume of the warning beep during Rear Cross Traf c Alert (RCTA) operation cannot be changed.
*4 This system functions only when the navigation system is functioning.
*5 If the auto-wiper control is set to Off, the wiper lever
*6 The operation may stop in 15 minutes due to the effect of the outside temperature even if the operation time of
the rear window defogger has been changed to Continuous.
*7 Change the ambient light illumination level with the position lights or headlights turned on.
*8 When set to OFF, the ambient lights remain turned off regardless of whether of not the position lights or
headlights are on or off. However, they will turn on or off in conjunction with the illuminated entry system.
*9 Available only in display from the centre display.
9–18
Feature
Factory Available
Setting Settings
Off
Off
On
13 steps up/
down from
0
initial setting
(total: 27 steps)
AUTO/
AUTO
MANUAL
2 steps up/
down from
0
initial setting
(total: 5 steps)
20 steps up/
down from
0
initial setting
(total: 41 steps)
At Manoeuvre/
Lane Guidance
Lane
& Turn by
Guidance
& Turn by
Street Name &
Turn
Turn by Turn/
position is set to intermittent operation.
Settings
Change
Method
On/Off B —
On/Off B —
On/Off C —
C —
C —
C —
C —
Turn/ C —
OFF