Mazda 6 Owner's Manual page 625

(Right side)
4. Pull the centre of each plastic retainer
and remove the retainers and the boot
end trim.
5. Pull the centre of each plastic retainer
and remove the retainers and the boot
side trim.
Removal
Installation
Owner Maintenance
6. Turn the socket and bulb assembly
anticlockwise and remove it.
7. Disconnect the bulb from the socket.
8. Install the new bulb in the reverse order
of the removal procedure.
Wagon
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Remove the cover.
3. Turn the socket and bulb assembly
anticlockwise and remove it.
Maintenance and Care
6–57