Table of Contents
Advertisement
VM3404H / VM3909H User Manual
VM3909H Rear View
3
6
1
2
No.
Component
1
Power Socket
2
Power Switch
3
Grounding Terminal
4
HDMI Input Ports
5
HDBaseT Output
Ports
6
HDMI Output Ports
7
IR Channel Ports
8
IR Port
9
RS-232 Serial Port
10
Ethernet Port
10
5
4
This is a standard 3-pin AC power socket. The power
cord from an AC source plugs in here.
This is a standard rocker switch that powers the unit
on and off.
The grounding wire attaches here. See Grounding,
page 13, for further details.
The cables from your HDMI source devices plug into
these ports.
The cables from your remote HDBaseT display
devices or HDBaseT receivers plug into these ports.
The cables from your local HDMI display devices plug
into these ports.
Connect IR receivers / transmitters into the IR Channel
ports for controlling the source and the display from
local or remote locations.
Connect an IR unit via the 3.5 mm Mini Stereo Jacks.
IR signals are used to control the VM3909H.
Connect a computer or high-end system controller via
this serial port.
In order to access the VM3909H's Browser Graphical
User Interface (GUI), the VM3909H must be
connected to your network. The cable that connects
the VM3909H to your LAN plugs in here. See Cable
Connection, page 14, for further details
7
Description
8
10
9
Advertisement
Table of Contents
