Enter Password - ATEN VM3404H User Manual

VM3404H / VM3909H User Manual

Enter Password

Upon VM3404H / VM3909H startup, check the front panel LCD to view the
loading progress. If the Password screen / LCD Menu fails to load, an error
message displays. Reset the unit and try again.
If you are accessing the VM3404H / VM3909H for the first time, the Password
screen appears as soon as the LCD loading process is done. Enter the default
password 1234 to continue to the Main Screen (see Main Screen, page 19).
Enter Password: * * * *
Incorrect Password
Additionally, the Password Screen appears if the VM3404H / VM3909H has
been configured to require a password for Front Panel operation (see Security
Mode, page 32).
To enter a password, do the following:
1. In the Enter Password field, check that the cursor is at the first asterisk
(*) and flashing.
2. Use the front panel Input Port pushbuttons (1–9) or (1–4) to enter the 4-
digit password. After the fourth digit has been entered correctly, the Main
Screen displays.
3. Press Cancel to clear the password. The digits revert to 4 asterisks and the
cursor goes back to the first asterisk.
Note: 1. The VM3404H / VM3909H password can be any four digit
combination between 1111 to 9999 (VM3909H ) or 1111 to 4444
(VM3404H). The default password is 1234.
2. If you enter an incorrect password, the cursor goes back to the
first digit and reverts to flashing. The Incorrect Password message
displays at the bottom of the screen, but clears as soon as a new
password is entered.
3. If Password option is Enabled (see Security Mode, page 32), the
LCD display time-out is 5 minutes by default.
18