Maintenance - ATEN VM3404H User Manual

Maintenance

The Maintenance page lets users upgrade the VM3404H / VM3909H's
firmware and back up or restore system settings. This is an Administrator only
function.
To upgrade the VM3404H / VM3909H's firmware, do the following:
1. Use the Browse button to locate the firmware upgrade file. Make sure you
have the correct file saved on your PC.
2. Click Upgrade to begin the upgrade procedure.
Note: After updating the firmware, it's recommended that you clear your web
browser's cache and then close and reopen the web browser. This will
ensure the GUI refreshes and functions properly.
To back up the VM3404H / VM3909H's system settings, do the following:
1. Click Backup. A configuration file will then begin downloading.
To restore the VM3404H / VM3909H's system settings, do the following:
1. Use the Browse button to locate the configuration file. Make sure you
have the correct file saved on your PC.
2. Click Restore to begin the restoration procedure.
Note: User accounts cannot be backed up or restored.
Chapter 4. Browser Operation
77