Table of Contents
Advertisement
VM3404H / VM3909H User Manual
Network
The Network page lets you configure the VM3404H / VM3909H's IP settings
for connecting to it via the web GUI, and enable/disable Telnet.
Enable DHCP to allow the DHCP server to assign an IP address to the
VM3404H / VM3909H. Select Disable to enter your own static IP address
settings for the device.
Click Cancel to use the following default values:
IP Address – 192.168.0.60
Subnet Mask – 255.255.255.0
Default Gateway – 192.168.0.1
Website Timeout* – N/A, 5, 10, 30, 60 minutes
Telnet enabled (checked)
Enter the values, then click Save. Changes may take a few seconds and after
refreshing the page automatically redirects you to the IP address specified.
* This option controls how long an inactive web connection stays logged
into the VM3404H / VM3909H. Any changes will take effect
immediately. The default setting is 5 minutes.
66
Advertisement
Table of Contents
