Change Password - ATEN VM3404H User Manual

4. Press Menu to return to the Menu page.
5. Press Cancel to return to the previous step without saving.

Change Password

1. To change the password for accessing the unit, press pushbutton 2.
2. In the Old Password field, the cursor flashes at the first digit. Enter the old
password (see Enter Password, page 18). If the old password is entered
correctly, you can proceed to the next step.
Note: If you entered an incorrect password, an error message appears and the
cursor goes back to the first digit (flashing). The Incorrect Password
message clears as soon as a new digit is entered.
3. In the New Password field, the cursor flashes at the first digit. Enter the
new password using the front panel number pushbuttons VM3404H:
(1111–8888) or VM3909H: (1111–4444).
4. Re-enter the new password in the following screen. The new password is
applied by the VM3404H / VM3909H immediately.
Chapter 3. Front Panel Configuration
33