Echo Command - ATEN VM3404H User Manual

Echo Command

The Echo function updates the RS232 controller when operations are made via
the front panel pushbuttons, web browser, or telnet. The changes echo back to
the RS232 controller to keep the settings in sync with the device.
The formula for the Echo command is as follows:
Command + Control + [Enter]
1. For example, to enable the echo feature, type:
echo on [Enter]
The following tables show the possible values for the Echo command
Command
Control
Note: Each command string can be separated with a space.
The following table lists the available Echo commands:
Command
echo
echo
echo Echo command
on Turns Echo function on
off Turns Echo function off (default)
Control Enter
on [Enter]
off [Enter]
Chapter 5. RS-232 Commands
Description
Description
Description
Turn on Echo function
Turn off Echo function
:
95