Connect External Cables - Cisco TelePresence MX800 Installation Manual

Installation guide for Cisco TelePresence MX800 Dual - Floor stand
18

Connect external cables

I, J
Make sure the cameras can move
freely before connecting power.
Always use the power
cables provided.
The plug-socket
combination must be
accessible at all times,
because it serves as
the main disconnecting
device.
Power (100-240 VAC, 50/60 Hz),
extension cord and country-specific cable
78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
(page 1 of 2)
Microphones
(max 8)
Network
1
Codec connector panel
Video input
e.g. computer
2
CAT 5e, shielded Ethernet cable, 5 m.
1
Two presentation cables are provided: HDMI ↔ HDMI;
2
and DVI/Euroblock ↔ VGA/mini jack.
Route the cables down,
and put them behind the
hooks in the floor stand.
Page 24