Connect The Cables - Cisco TelePresence MX200 G2 Installation Manual

Installing Cisco TelePresence MX200 G2 - Table Stand
2

Connect the cables

C D
Power switch
Power
(100-240 VAC,
50/60 Hz)
Always use the provided
power cable.
The wall socket outlet must
be easily accessible after
installation.
78-100247-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved.
DVI-I
HDMI
2 microphone
nd 2, 3
Audio line input
Audio line output
USB, for future use
For maintenance only
Reset to factory settings
Touch
controller
1
LAN
1
Video output
2
(e.g. 2 display)
nd
Video input
2
(e.g. PC)
Microphone
3
Use the cable that is labeled with
1
the Touch controller; use the cable that
is labeled with for the LAN
Optional
2
Always use the provided Cisco
3
TelePresence Table Microphone 20
for
4