Resolution
521 526
Selecting decimal places
Place Min. value
0
1
2
Setting the output
521 526
Scaling takes place when the unit has been selected.
Example: 4 - 20 mA should correspond to
Entering the min. value
Set the 4 mA value (corresponds to 0%) with
or
ward/back quickly) and confirm the selection with
Entering the max. value
Set e.g. the 20 mA value (corresponds to 100 %)
with
ward/back quickly) and confirm the selection with
6.3.3 F-Reset
521 526
Select whether you want to reset the probe / sensor
data to the standard values (factory setting).
5 Select Yes or No with
the selection with
- If you select Yes: probe / sensor data will be reset.
If you select No or
celled.
Max. value
-9999
to
99999
-999.9
to
9999.9
-99.99
to
999.99
0 - 100 % in the subsequent display.
= 0 % (hold the key down to move for-
.
or
(hold the key down to move for-
.
6. Menu functions
6.3 Probes
or
and confirm
.
: the process will be can-
23