Table of Contents
Advertisement
6. Menu functions
18
6.2 Memory
22
M e a s R . h r s .
00
22
m i n. s e c .
h m i n .
02:30
Q u a n t i t y
23
P r i n t
L o g
03
6.2.2 Configuration
521 526
(only available in the Fast/Automatic measurement
program)
Set how the measurement program is to function.
Measurement program Auto.
4 Set the measuring rate in hrs., min. and sec. with
820
5 Select the number of measurements with
200
Measurement program Fast (20 measurements
per sec.)
4 Select the number of measurements with
521 526
6.2.3 Printing
The logs stored for a measurement location, e.g.
the reading and other available parameters (density,
temperature, humidity, pressure, cross-section, offset
factor, Pitot tube factor) are printed.
4 Select the log with
5 Printout starts
- The data is sent to the printer via the infrared inter-
or
. Hold the key down to go forward/
back quickly. Every time 60:00 min. is passed, the
hour value increases. Confirm the selection with
.
(hold the key down to go forward/back
quickly) and confirm the selection with
duration of the measurement series is displayed in
the upper line for your information.
(hold the key down to go forward/back
quickly) and confirm the selection with
down to go forward/back quickly) and confirm the
selection with
face.
flashes during data transmission.
If the
key in the measurement menu is pres-
sed, the reading currently stored is printed out.
If no log is stored the display shows "Error".
or
(hold the key
.
or
. The
or
.
Advertisement
Table of Contents
