Table of Contents
Advertisement
SuperServer 1028GQ-TR(T) User's Manual
CPU Configuration
This submenu displays the following CPU information as detected by the BIOS. It
also allows the user to configure CPU settings.
Processor 0/Processor 1
This submenu displays the following information of the CPU installed in Socket 0,
and Socket 1.
•
Processor Socket
•
Processor ID
•
Processor Frequency
•
Processor Max Ratio
•
Processor Min Ratio
•
Microcode Revision
•
L1 Cache RAM
•
L2 Cache RAM
•
L3 Cache RAM
•
Processor 0 Version
•
Processor 1 Version
Clock Spread Spectrum
Select Enable to allow the BIOS to attempt to reduce the level of Electromagnetic
Interference caused by the components whenever needed. The options are Disable
and Enable.
Hyper-Threading (All)
Select Enable to support Intel's Hyper-threading Technology to enhance CPU
performance. The options are Enable and Disable.
Cores Enabled
Use this item to set the number of CPU cores to be enabled in your system. Enter
"0" to enable all cores. The default setting is 0.
Execute-Disable Bit (Available if supported by the OS & the CPU)
Select Enable for Execute Disable Bit Technology support, which will allow the
processor to designate areas in the system memory where an application code
can execute and where it cannot, thus preventing a worm or a virus from flooding
illegal codes to overwhelm the processor or damage the system during an attack.
7-6
Advertisement
Table of Contents
