Table of Contents
Advertisement
SUPERSERVER 1028GQ-TR(T) User's Manual
2-5
Installing the System into a Rack
There are a variety of rack units on the market, which may require a slightly different
assembly procedure. This rail set fits a rack between 25.6" and 33" deep.
The following is a basic guideline for installing the system into a rack with the rack
mounting hardware provided. You should also refer to the installation instructions
that came with the specific rack you are using.
Identifying the Sections of the Rails
The chassis comes with two sets of rack rails, one set for the right side of the
chassis and one for the left. Each set consists of an inner rail that is
to the chassis, and an outer rail that attaches to the rack.
Inner Rails--
pre-installed
Figure 2-1. Identifying the Sections of the Rack Rails
2-4
pre-attached
Outer Rails--
slide together
Front and Rear
Brackets--
attach to the rack
Advertisement
Table of Contents
