Assembling The Outer Rails - Supero 1028GQ-TR User Manual

Assembling the Outer Rails

Each outer rail comes in two sections that must be assembled before mounting
onto the rack.
Assembling the Outer Rails
1. Identify the left and right outer rails by examining the ends, which bend outward.
Match the left front outer rail with the left rear outer rail and the same for the
right rails.
2. Align the round post in the rear rail (B) with the round hole at the end of the slot
in the front rail (A), and slide the front section into the rear section.
Round Hole
Secure to the
front of the rack
Figure 5-3. Assembling the Outer Rails
Slide outer rails
together
Assembling the sections of
1
A
the outer rail
Outer rail assembled
2-5
Chapter 2: Server Installation
Secure to the
rear of the rack
1
B
Bracket with
Square Pegs