Samsung SC-D362 Service Manual page 44

Disassembly and Reassembly
4-2-8 Guide Rail Ass'y
4-2-8(a) Disassembly
Note1 : When removing or reassembly, do not touch
Guide Roller S ˇ and Roller T ¨. (Protection Stein)
Note2 : When removing or reassembly,the Guide
Roller S ˇ and T ¨, be careful not to deform the
Guide Rail Ass'y ´.(pushing the cautious)
1) Remove the 3 Screws Œ, and then lift up Guide Rail
Ass'y ´.
2) Separate it and turn to countclock wise the Guider
Roller S ˇ and T ¨.
GUIDE ROLLER S ˇ
POLE BASE S ˆ
4-14
3 SCREWS Œ
POLE BASE T Ø
4-2-8(b) Reassembly
1) Assembly the Guide Roller S ˇ and T ¨ as turn to
countclock wise to the Pole Base S ˆ and T Ø.
2) After Pole Base S ˆ and T Ø unloading mode and
then assemble Guide Rail Ass'y ´ to the Main
Chassis ∏ and secure the 3 Screws Œ.
Note 1 : When removing and reassembling Guide Rail
Ass'y, be careful not to assemble point.
Note 2 : Disassemble and reassemble in unload mode.
Note 3 : After assembling, make sure that loading and
unloading work correctly by applying 3V~5V to the
Motor Loading.
Fig 4-13 Guide Rail Ass'y
¨ GUUIDE ROLLER T
´ GUIDE RAIL ASS'Y
∏ MAIN CHASSIS
Samsung Electronics