Advanced Recording - Samsung SC-D362 Service Manual

Operating Instructions
Basic Recording
Using the LIGHT (SC-D362/D364/D365/D366
LIGHT function works only in <Camera> mode.
The LIGHT enables you to record a subject in dark places without sacrificing color.
The LIGHT can be used with
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE].
3. Press the [LIGHT] button until <Color N. 1/15 (
[ Notes ]
The LIGHT
The range of the
[ Danger ]
The LIGHT
Do not touch it while in operation or soon after turning it off, otherwise serious injury may
result.
Do not place the Camcorder into the carrying case immediately after using the LIGHT,
since it remains extremely hot for some time.
Do not use near flammable or explosive materials.
ENGLISH

Advanced Recording

Selecting the Record Mode & Audio Mode
The Record Mode function works in both <Camera> and <Player>
(SC-D365/D366
This Camcorder records and plays back in SP (standard play) mode and in LP (long play)
mode.
- <SP> (standard play): This mode permits 60 minutes of recording time with a DVM60 tape.
- <LP> (long play): This mode permits 90 minutes of recording time with a DVM60 tape.
The Audio Mode function works in both <Camera> and <Player> modes.
This Camcorder records sound in two ways. (12Bit, 16Bit)
- <12Bit>: You can record two 12Bit stereo sound tracks.
- <16Bit>: You can record one high quality stereo sound using 16Bit recording mode.
1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE].
3. Press the [MENU] button.
4. Move the
5. Move the
then press the
6. Move the
then press the
Record mode can be set to <SP> or <LP>.
Audio mode can be set to <12Bit> or <16Bit>.
7. To exit, press the [MENU] button. The selected icon is displayed.
When <12Bit> is selected, no <12Bit> indication is displayed.
[ Notes ]
We recommend that you use this Camcorder to play back any tapes recorded on this Camcorder.
Playing back a tape recorded in other equipment may produce mosaic shaped distortion.
When you record a tape in SP and LP modes, or LP mode only, the playback picture may be
distorted or the time code may not be written properly if there is a gap between scenes.
Record using SP mode for best picture and sound quality.
[ Caution ]
To edit audio on your camcorder, you must set 12Bit for the Audio Mode and SP for the Rec
Mode.
44 44
11-18
COLOR NITE
(SC-D363/D364/D365/D366 only)
will not turn on or off while you are recording.
LIGHT is limited. (up to 6.6ft (2m))
can become extremely hot.
only)) modes. page 19
The original stereo sound can be recorded onto the Main (Sound1) track.
Additional stereo sound can be dubbed onto the Sub (Sound2) track.
Audio dubbing is not possible when using this mode.
(SC-D363/D364/D365/D366
[Zoom] lever to the up or down to select <Record>, then press the
[Zoom] lever to the up or down to select <Rec Mode> or <Audio Mode>,
[OK] button.
[Zoom] lever to the up or down to select desired record mode or audio mode,
[OK] button.
only)
page 19
function only.
)> appears.
(DV IN or AV IN
page 19
only)
[OK] button.
ENGLISH
1
3
COLOR NITE
LIGHT
STBY 0:00:10
SP
60min
Color N. 1/15
43 43
4
Camera Mode
Record
Rec Mode
SP
Audio Mode
12Bit
WindCut Plus
Auto
Real Stereo Off
Move Select Exit
ZOOM OK MENU
6
Camera Mode
Back
Rec Mode
SP
Audio Mode
LP
WindCut Plus
Real Stereo
Move Select Exit
ZOOM OK MENU
6
Camera Mode
Back
Rec Mode
Audio Mode 12Bit
WindCut Plus 16Bit
Real Stereo
ZOOM Move OK Select MENU Exit
7
STBY 0:00:10
SP
60min
16Bit
Samsung Electronics