Samsung SC-D362 Service Manual page 147

Advanced Recording
Still Image Recording
Still image recording works only in <Camera> mode. page 19
A tape must be inserted as Still Images are recorded on a tape.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE].
3. Press the [PHOTO] button.
The still image is recorded for about 6~7 seconds.
4. After the still image has been recorded, the Camcorder returns to its previous mode.
Searching for a still image
The Photo Search works only in <Player> mode. page 19
1. Set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [TAPE].
3. Press the [MENU] button.
The menu list will appear.
4. Move the
5. Move the
button.
/
6. Press the [
The photo search process appears while you are searching.
After completing the search, the Camcorder displays the still image.
7. To exit, press the [ (STOP)] or [MENU] button.
[ Notes ]
Still image recording is not available while recording.
You can use still image recording by using the [PHOTO] button on the remote control.
Pressing the [PHOTO] button on the remote control records the still image at once with
automatic focusing.
When there are no still images recorded on the tape, it will be fully rewound or forwarded.
Still image recording is not available while
DIS, Digital Zoom,
Still image recording while EASY.Q, DIS or Digital Zoom mode is in use will the release the current mode.
(After a still image is taken, the mode will return automatically.)
ENGLISH
Playback
Playing Back a Tape You have recorded on the LCD Screen
The Playback function and speaker works only in <Player> mode. page 19
You can monitor the playback picture on the LCD Screen.
1. Set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [TAPE].
3. Insert the tape you wish to view. page 32
4. Open the LCD Screen.
Adjust the angle of the LCD Screen and set the brightness or color if necessary.
5. Press the [
To stop rewinding, press the [ (STOP)] button.
The Camcorder stops automatically after rewinding is complete.
6. Press the [ / (PLAY/STILL)] button to start playback.
You can view the picture you recorded on the LCD Screen.
To stop the play operation, press the [ (STOP)] button.
Adjusting the LCD Bright/LCD Color during Playback
You can adjust the LCD Bright/LCD Color during playback.
The adjustment method is the same procedure as used in <Camera> mode. page 29
Adjusting the Volume
When you use the LCD Screen for playback, you can hear recorded sound from the built-
in Speaker.
- Take the following steps to lower the volume or mute the sound while playing a tape on
the Camcorder.
When you hear sounds once the tape is in play, use the [Zoom] lever to adjust the volume.
A volume level display will appear on the LCD Screen.
Levels may be adjusted from anywhere between <00> to <19> and you will not hear
any sound when the volume is set on <00>.
If you close the LCD Screen while playing, you will not hear sound from the speaker.
When the AV cable is connected to the Camcorder, you cannot hear sound from the Built-
In Speaker and cannot adjust the volume.
Volume control is disabled while PB Zoom is in use.
58 58
Samsung Electronics
(SC-D363/D364/D365/D366
(SC-D363/D364/D365/D366
[Zoom] lever to the up or down to select <Tape>, then press the
[Zoom] lever to the up or down to select <Photo Search>, then press the
will flash on the LCD.
/ (REW/FF)] buttons to search the still image.
(SC-D364/D366 only)
COLOR NITE
COLOR NITE, Visual Effect
(SC-D363/D364/D365/D366
(REW)] button to rewind the tape to the starting point.
only)
only)
[OK] button.
or 16:9 Wide is in use.
are not available, when still image recording.
only)
ENGLISH
OK
Q U
IC K
M E
N U
4
Player Mode
Tape
Photo Search
Photo Copy
Audio Select
Sound[1]
Audio Effect
Off
Move Select
ZOOM OK MENU
6
0:41:56:10
SP
[OK]
25min
Photo Search
Search Exit
/ MENU
0:44:38:03
SP
Photo Search 25min
Photo searching...
Search Exit
/ MENU
5 6
STOP
Q U
IC K
M E
N U
0:46:00:11
SP
[05]
Operating Instructions
Exit
57 57
60min
11-25