Samsung SC-D362 Service Manual page 18

Alignment and Adjustments
5) How to set up the camera adjustment mode
[STEP 1]
ΠConnect the Power source.
´ Set the Power Switch to "CAM" position and Mode Switch to "TAPE" position.
[STEP 2]
ΠPress and hold the "STOP" and "PB ZOOM" buttons on the video camera at the same time for more than
5 seconds.
´ When monitor OSD appears as shown Fig. 3-5, the adjustment mode has been activated successfully.
ˇ Move the "Zoom Lever"to highlight CAM ADJ and push the "PHOTO Button"
¨ Monitor OSD shows Fig. 3-6.
Then Camera adjustment mode has been activated successfully.
[STEP 3]
In order to complete the adjustment the power must be reset.
This can be done by disconnecting and reconnecting the power source.
DISPLAY
MACRO/PB ZOOM
Speaker
Mode Switch
3-4
Fig. 3-4
Player Mode
Back
VCR ADJ
CAM ADJ
CAM DISP
LCDCVF AJD
DSP WRITE
Fig. 3-5
Viewfinder
M E N U
Color Nite
Light
Samsung Electronics