Samsung SC-D362 Service Manual page 162

Operating Instructions
IEEE 1394 Data Transfer
Transferring IEEE1394 (i.LINK)-DV Standard Data Connections
Connecting to a DV Device (DVD Recorder, Camcorder,
Connecting to other DV standard products.
- A standard DV connection is quite simple.
- If a product has a DV jack, you can transfer data by connecting to the DV jack using the correct cable.
!!! Please be careful since there are two types of DV jacks (4pin, 6pin). This Camcorder has a 4pin jack.
With a digital connection, video and audio signals are transmitted in digital format, allowing high quality images
to be transferred.
Connecting to a PC
If you want to transmit data to a PC, you must install an IEEE 1394 add-on card into the PC. (not supplied)
The frame rate for moving image is dependent on the capacity of the PC.
System Requirements
CPU : faster Intel
Operating system : Windows
Main memory : more than 64 MB RAM
IEEE1394 add-on card or built in IEEE1394 card
[ Note ]
Operation is not guaranteed for all the recommended computer environments mentioned above.
ENGLISH
IEEE 1394 Data Transfer
Recording with a DV Connection Cable
1. Set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [TAPE].
3. Connect the DV cable (not supplied) from the DV jack of the
Camcorder to the DV jack of the other DV device.
Make sure that
4. Press the [Start/Stop] button to begin REC PAUSE mode.
<PAUSE> is displayed.
5. Start playback on the other DV device while you monitor the picture.
6. Press the [Start/Stop] button to start recording.
If you want to pause recording momentarily, press the
[Start/Stop] button again.
7. To stop recording, press the [ (STOP)] button.
[ Notes ]
When you transmit data from the Camcorder to another DV device, some functions may not work.
If this occurs, please reconnect the DV cable or turn the power OFF and ON again.
When you transmit data from the Camcorder to PC, PC function button is not available in <M.Player> mode.
Do not use other DV device when using IEEE1394.
Do not connect the Camcorder to a PC using both DV and USB cables. It may not operate properly.
The IEEE1394 cable (DV cable)is sold separately.
Moving image software is commercially available.
Most DV enabled PCs have a 6 pin jack. In this case, a 6pin/4pin cable is required for the connection.
Most DV enabled Notebooks and Laptops have a 4 pin socket. Use a 4pin/4pin cable for the connection.
DIS and
If DV (IEEE1394) mode is set, DIS and
When using this Camcorder as a recorder, the pictures that appear on a monitor may seem uneven,
however recorded pictures will not be affected.
88 88
11-40
¤ Pentium III" 4 50MHz compatible.
¤ 98SE, ME, XP, Mac OS (9.1~10.2)
(SC-D363/D364/D365/D366
is displayed.
COLOR NITE are not available when in DV (IEEE1394) mode.
COLOR NITE
etc.)
only)
modes will be released.
ENGLISH
(not supplied)
87 87
Samsung Electronics