Samsung SC-D362 Service Manual page 25

3-3-4 Mechanical Check and Adjustment
3-3-4(a) Tension Regulator Adjustment
1) Disassembly
ΠFor the removal of the Housing Ass'y refer to 4-2-2 (page 4-6).
2) Adjustment
ΠSet to PLAY mode (without cassette tape).
´ Check that the distance between external surface of Holder Loading and extenal diamater of Arm Tension is
0.7±0.3mm. (Fig. 3-12)
ˇ If necessary, proceed to step 4.
¨ If the Arm Tension Œ is located inside (or right) the position specified, adjust the Cap Adjust Œ toward
arrow "A". (If it is located outside (or left), adjust toward arrow "B".)
Note : Check if the Arm Tension can be moved toward arrow "C" in PB mode.
3) Reassembly
ΠFor the removal of the Housing Ass'y refer to 4-2-2 (page 4-6).
ARM TENSION Œ
CAP ADJUST ´
Samsung Electronics
+
0.7 0.3
-
Fig. 3-13
Alignment and Adjustments
3-11