Samsung SC-D362 Service Manual page 128

Operating Instructions
Preparation
Connecting a Power Source
There are two types of power source that can be connected to your Camcorder.
- The AC Power adapter and AC Cord: used for indoor recording.
- The Battery Pack: used for outdoor recording.
Using a Household Power Source
Connect to a house hold power source to use the Camcorder without worrying
about the battery power. You can keep the Battery Pack attached; the battery
power will not be consumed.
1. Turn the [Power] switch to [OFF].
2. Connect the AC Power adapter (AA-E8 Type) to the AC Cord.
3. Connect the AC Cord to a wall socket.
The plug and wall socket type may differ according to your resident country.
4. Connect the DC cable to the DC jack of the Camcorder.
5. Set the Camcorder to each mode by holding down the tab on the [Power]
switch and turning it to the [CAMERA] or [PLAYER] mode.
About the Operating Modes
The operating modes are determined by the position of the [Power] switch and the [Mode] switch.
Set the Operation Mode by adjusting [Power] switch and [Mode] switch before operating any functions.
Mode Name
[Power] Switch
[Mode] Switch
(SC-D363/D364/
D365/D366
[Note]
The <M.Cam Mode> and the <M.Player> Mode are only enabled on SC-D363/ D364/ D365/ D366.
ENGLISH
Preparation
Using the
QUICK MENU
QUICK MENU
Functions available using the
Camera Mode
Setting
Programed
Setting the 16:9 Wide
Setting the White Balance (White Balance)
Setting the Shutter Speed (Shutter)- Only can be operated by using the
page 47
Setting the Exposure (Exposure)- Only can be operated by using the
page 47
Setting the
M.Cam Mode
Setting the Memory Type (Memory Type)
Setting the White Balance (White Balance)
Setting the Photo Quality (Photo Quality)
Programed Automatic Exposure Modes (Program AE)
Setting the Back Light Compensation (BLC)
M.Player Mode
Setting the Memory Type (Memory Type)
Playing the Moving Images (MPEG) on the Memory Card (M. Play Select)
Deleting
Protection from accidental Erasure (Protect)
Marking Images for Printing (Print Mark)
For example: Setting the White Balance
1. Press the
The quick menu list will appear.
2. Move the
button.
3. Move the
Custom
4. To exit, press the
20 20
11-6
<Camera Mode>
only)
QUICK MENU
is used to access Camcorder functions by using the
provides easier access to frequently used menus without using the [MENU] button.
QUICK MENU
the Digital Image Stabilizer (DIS)
Automatic Exposure Modes (Program AE)
page 54
Back Light Compensation (BLC)
Photo Images and Moving Images (Delete)
[QUICK MENU] button.
[Zoom] lever to the up or down to select <White Balance>, then press the
[Zoom] lever to the up or down to select desired mode (Auto, Indoor, Outdoor or
WB), then press the [OK] button.
[QUICK MENU] button.
<Player Mode> <M.Cam Mode>
[QUICK MENU]
are as below:
page 55
page 49
page 51
QUICK MENU
QUICK MENU
page 41
page 70
page 51
page 71
page 49
page 41
page 70
page 79
page 76
page 75
page 84
ENGLISH
QU
IC K
ME
NU
Power Switch
<M.Player Mode>
button.
1
STBY
SP
DIS
Off
Program AE
16:9 Wide
White Balance
Shutter
Exposure
BLC
Exit
Q.MENU
2
STBY SP
DIS
Program AE
16:9 Wide
White Balance Auto A
Shutter
Exposure
BLC
Q.MENU Exit
4
STBY
SP
[OK]
<When the Outdoor option in Camera
mode was selected>
19 19
0:00:10
60min
0:00:10
60min
0:00:10
60min
Samsung Electronics