Samsung SC-D362 Service Manual page 136

Operating Instructions
Basic Recording
Recording with Ease for Beginners (EASY.Q Mode)
The EASY.Q function works only in <Camera> mode.
The EASY.Q function allows a beginner to easily make good recordings.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE].
3. By pressing the [EASY.Q] button, all functions on the Camcorder will be set to off and the
recording settings will be set to the following basic modes:
The words <EASY.Q> and <DIS (
4. Press the [Start/Stop] button to start recording.
Recording will begin using the basic automatic settings.
5. Press the [EASY.Q] button again in the STBY mode and then turn the EASY.Q mode off.
The EASY.Q function will not turn off while you are recording.
The Camcorder will return to the settings that were set prior to activating EASY.Q mode.
[ Notes ]
In EASY.Q mode, certain functions are not available, such as Menu, BLC, Manual focus.
If you want to use these functions, you must first turn the EASY.Q mode off.
The EASY.Q mode settings are deleted when the Battery Pack is removed from the
Camcorder and must be reset when the Battery Pack is replaced.
Taking a still image using the [PHOTO] button while EASY.Q is set releases DIS function.
Digital Zoom,
16:9 Wide is not available in the EASY.Q mode.
ENGLISH
Basic Recording
Reviewing and Searching when Recording (REC SEARCH)
The REC SEARCH function works only in <Camera> mode.
To be used to review previously recorded images or to find a point to record a new image in the STBY mode.
Record Search (REC SEARCH)
1. Set to STBY mode by pressing [Start/Stop] button.
2. [REC SEARCH -] enables you to play the recording backwards and
[REC SEARCH +] enables you to play it forwards, as long as you keep each button
pressed down.
If you press the [REC SEARCH -] button in STBY mode, your Camcorder will play
in reverse for 3 seconds and return to the original position automatically.
[ Notes ]
Mosaic shaped distortion may appear on the screen while in Record Search mode.
Pressing [Start/Stop] button after REC SEARCH will overwrite the images recorded after
that point.
When a cassette is loaded and the Camcorder is left in the STBY mode for more than 5 minutes without being used,
it will switch off automatically.
To use it again, press the [Start/Stop] button or set the [Power] switch to [Off] and then back to [CAMERA].
This auto power off feature is designed to save Battery power.
36 36
11-14
(SC-D363/D364/D365/D366
)> are displayed at the same time.
COLOR NITE or Visual Effect is not available in the EASY.Q mode.
page 19
only)
page 19
ENGLISH
1
3
STBY 0:00:10
SP
60min
35 35
Samsung Electronics