12. Unscrew the two ⊕ screws to remove the Support Stay.
⊕
SCREW
Figure 6-40. Removal of the Stacker Unit
13. Remove CN6 and CN3 on the FIN Control Board and the Staple Connectors F
and R. Then remove the wiring from the Clamp.
CN6
STAPLE F
CONNECTOR
Figure 6-41. Removal of the Stacker Unit
14. Unscrew the four ⊕ screws to remove the Stacker Unit.
⊕
SCREWS
Figure 6-42. Removal of the Stacker Unit
M M
L
0 0
SUPPORT STAY
⊕
SCREW
CLAMPS
CN3
STAPLE R CONNECTOR
⊕
SCREWS
STACKER UNIT
Disassembling, Assembling & Adjustment
6-23