Table of Contents
Advertisement
4. Remove the Belt/I (L=234), Pulley/(Z=24,30), E ring and Metal from the Rear side.
5. Remove the Driving pulley/A, Belt/D (L=309), Driving spacer, Pulley/F, Belt/I
6. Remove the Driving gear/B (Z=24) and Shaft holder (G8501064 / N421793) from
Figure 4-19. Removal of the Bearing Parts
4-18
DDP70 Finisher Maintenance Manual
(L=234), Driving spacer, Gear/A (Z=27), E ring and Metal from the Rear side.
the Rear side.
M M
L
0 0
Advertisement
Table of Contents
