4.3.7. Replacing the Conveyance Motor (M1)
CAUTION:
Be sure to turn OFF the MAIN AC POWER prior to performing the maintenance.
Applicable jigs and tools: ⊕ Screwdriver.
[Disassembling Procedures]
1. Remove the Rear Cover.
2. Remove the Connector and the ⊕ screws.
3. Remove the Conveyance Motor (M1).
⊕
Figure 4-14. Removal of the Conveyance Motor (M1)
[Assembling Procedures]
1. Reinstall the Conveyance Motor (M1) reversing the procedure above.
4-12
DDP70 Finisher Maintenance Manual
SCREWS
(Refer to item 6.1.1 on page 6-1)
CONVEYANCE
CONNECTOR
MOTOR (M1)
M M
L
⊕
SCREWS
0 0