Table of Contents
Advertisement
6. Unscrew the two ⊕ screws and take out the Up-down Support Plate (front and
Figure 6-25. Removal of the Paper Exit Stopper Plate
7. Unscrew the nine ⊕ screws, lift the Up-down Stay and take out the Paper Exit
Figure 6-26. Removal of the Paper Exit Stopper Plate
[Assembling Procedures]
1. Reinstall the Paper Exit Stopper Plate by reversing the procedure above.
6-16
DDP70 Finisher Maintenance Manual
rear).
UP-DOWN SUPPORT
PLATE (REAR)
⊕
SCREWS
Stopper Plate to the lower side.
PAPER EXIT
STOPPER PLATE
⊕
SCREWS
UP-DOWN SUPPORT
PLATE (FRONT)
⊕
SCREWS
⊕
SCREWS
UP-DOWN STAY
⊕
SCREWS
M M
L
0 0
Advertisement
Table of Contents
