Table of Contents
Advertisement
12. Wrap the opposite side (long portion) of the Cable around the Up-down Pulley
Figure 6-33. Removal of the Up-down Cable
13. When the Up-down Stay is pressed down, the four ⊕ screws of the Cable Bracket
Figure 6-34. Removal of the Up-down Cable
[Assembling Procedures]
1. Reinstall the Up-down Cable by reversing the procedure above.
6-20
DDP70 Finisher Maintenance Manual
from the inside to the outside and fix the cable end.
CABLE (LONG PORTION)
CABLE END
will tighten.
⊕
SCREWS
UP-DOWN STAY
PUSH DOWNWARDS
M M
L
⊕
SCREWS
0 0
Advertisement
Table of Contents
