Table of Contents
Advertisement
8. Move the Up-down Stay so that the inner cable which is not removed (the shorter
side from the Cable Bracket) is wound around twice.
WRAP
AROUND
TWICE
Figure 6-31. Removal of the Up-down Cable
9. Wrap the short side of the cable (from the Cable Bracket) being exchanged
around the Up-down Pulley twice.
10. Line the Cable Bracket position up with another Cable Bracket which was not
removed and, after inserting the pin, install the Up-down Pulley with the E-ring.
11. Hook the Cable onto the Upper Pulley.
2 WINDS
E-RING
Figure 6-32. Removal of the Up-down Cable
M M
L
0 0
SHORTER CABLE
Disassembling, Assembling & Adjustment
UPPER PULLEY
6-19
Advertisement
Table of Contents
