Table of Contents
Advertisement
7. Remove the E ring and Shaft holder (G8501064 / N421793) from the Front side.
8. Remove the two E ring and the two Metal from the Front side.
Figure 4-20. Removal of the Bearing Parts
[Assembling Procedures]
1. Reinstall the two Metal of the Front side by reversing the procedure above.
2. Reinstall the Shaft holder (G8501064 / N421793) of the Front side by reversing
the procedure above.
3. Reinstall the Shaft holder (G8501064 / N421793) of the Rear side by reversing
the procedure above.
4. Reinstall the two Metal of the Rear side by reversing the procedure above.
5. Reinstall the three Shaft holder (G8501088 / N421817) of the Rear side by revers-
ing the procedure above.
M M
L
0 0
4-19
Preventive Maintenance
Advertisement
Table of Contents
