Section 3
| Gateway G1 Configuration
3.10.4 Configuring the app
To control your Smart Home gateway while being on the road, its address has to be entered in the app. Basical-
ly, the connection is secured and only possible via authenticated devices. Follow these steps:
1.
Start the app.
2.
In the menu, under Configuration -> Facilities click on the pencil icon. If you are at the start screen (see
figure 67), tap the display for 2 seconds.
Figure 67
3.
The view changes to configuration view (see figure 68).
Figure 68
4.
Tap "New Facility" (see figure 68) – even if you just want to additionally enter a public address for an alrea-
dy known facility.
Gateway G1
43