Table of Contents
Advertisement
Section 2
| Commissioning
You are now on the web interface's home screen (see figure 4). If this site does not open, check the wiring and
make sure that the gateway is in the same logical network as the device from which you opened the web inter-
face is. The gateway's default device address is 211, in the subnet 192.168.0.X (subnet mask 255.255.255.0).
If the IP address of your computer does not start with 192.168.0. * , change it temporarily in order to configure
the gateway properly. More information can be found in section 3.9 "Changing network parameters for gateway
access".
Figure 4
2.4 First steps to configure your gateway
Before you can use the gateway for your Smart Home System, the following settings have to be done:
•
Adjust network settings to the network environment
•
Authorize control unit
•
Add components (dimmer, power switch, etc.)
2.4.1 Network settings
Configure the network parameters as described in section 3.3.1, or switch to DHCP with the help of the pro-
tected button at device's rear side, as described in section 9.
2.4.2 Authorizing control device
Before you can control and configure your Smart Home System via app, you need to authorize your smartphone
or tablet as a control unit. Navigate to "Security" and follow these steps:
1.
In the section "Enable access for an additional device", enter any access code in the "Access code" textbox
(must be at least 4 digits). Optionally, you can remember the randomly generated 4 digit code (see figure
8). This code will be automatically generated when opening this site.
2.
Click "Activate". For the next step, you have a time limit of 5 minutes. When reaching this time limit, the
authorization time frame automatically closes. After each authorization attempt though an app, the time fra-
me is automatically closed prematurely.
3.
Start the app on your smartphone or tablet (available in the Apple Store or Google Play Store) and select
the appropriate gateway. You will then be asked to enter the recently defined access code. After that, you
have access to your Smart Home System via the configured device.
Gateway G1
12
Advertisement
Table of Contents
