Table of Contents
Advertisement
Section 3
| Gateway G1 Configuration
In this scenario, your gateway could get the static IP address 192.168.177.201, if this address is not already
assigned to another device (IP camera, VoIP phone, NAS etc.).
IP address and subnet mask (also known as net mask) are mandatory required (see figure 23). Entering default
gateway and DNS server is optional. It is, however, required for functions such as automatic time setting via
NTP (Network Time Protocol), firmware updates and, optionally, remote maintenance by ubisys. Therefore, you
should configure these settings.
Figure 23
Detailed information about the network parameters, such as default gateway and DNS server in your network
can be determined via your router or PC. More information about this can be found in section 4 "Determining the
network parameters".
Once you have configured all settings, click the "Save" button. Depending on the recent changes, your gateway
will now be available via the new IP address; the old address is not valid anymore.
3.3.2 Proxy settings
If web access in your network is provided by a HTTP proxy server, you can enter all necessary configuration pa-
rameters here (see figure 24). More information about the parameters can be given by your network administra-
tor or by "Determining the network parameters" (see section 4) via your PC.
In typical network environments there is usually no proxy. That means you do not need to fill the appropriate text
boxes with information.
Note:
The password specified here is stored encrypted on the device.
Figure 24
Gateway G1
22
Advertisement
Table of Contents
