Table of Contents
Advertisement
Section 3
| Gateway G1 Configuration
The gateway offers a web based configuration interface, which can be reached by a web browser via your PC,
tablet or smartphone. This allows you to configure all required settings concerning the gateway.
For this, enter the IP address of your Smart Home gateway in the web browser's address line. After pressing the
"Enter" key, a prompt will be displayed. Here, you enter the username admin and the password (which is admin
as well, by default) (see figure 11).
Default parameters:
IP address:
192.168.0.211
Username:
admin
Password:
admin
Figure 11
If you already configured your gateway, but forgot the address, you can simply look after it in the Smart Home
app. More information about how to determine the IP address of your gateway can be found in section 5 "Deter-
mine the gateway's address".
Caution:
Your PC, tablet or smartphone has to be in the same network as the gateway is, in order to configure
it. If this is not the case, more information can be found in section 3.9 "Change network parameters for gate-
way access".
3.1 Status menu
In the main menu, navigate to "Status". Here, you find detailed information about your Smart Home System as
well as its operating status.
3.1.1 Device information
In the section "Device information" you find detailed information about your gateway, such as the model number,
serial number, current firmware version etc. (see figure 12).
Gateway G1
15
Advertisement
Table of Contents
