Table of Contents
Advertisement
Section 3
| Gateway G1 Configuration
Figure 29
2.
Newly detected components can be found as a status message under "Status" as well as in your app under
Configuration -> Basic Configuration -> Components.
Figure 30
3.4.5 Renew ZigBee network key
Communication between the individual devices in your Smart Home System is exclusively encrypted. After
setting up the Smart Home System, it may be useful to renew the network key on all devices. By this, you can
ensure that devices, which once obtained the network key, but should not have access anymore (for example,
the USB stick of an installer), no longer can access components via the ZigBee network. To renew the network
key, click on "Refresh" (see figure 31).
Figure 31
3.5 Updates
To keep your Smart Home System updated, you should periodically install the newest firmware. Software up-
dates feature improvements and new functions.
Installing updates requires a correctly configured internet connection (see section 3.3.1 "Network settings").
The number of available updates is automatically displayed in the main navigation (see figure 32). Moreover, the
status LED of your gateway indicates available updates by a blue flash.
Figure 32
3.5.1 Firmware update for the gateway
If there is an update for your gateway available and you wish to download it, follow these steps:
Gateway G1
25
Advertisement
Table of Contents
