3
Configuring the Switch
Displaying Information for Dynamic IP Source Guard Bindings
Use the Dynamic Information page to display the source-guard binding table for a
selected interface.
Command Attributes
• Query by – Select an interface to display the source-guard binding. (Options: Port,
VLAN, MAC Address, or IP Address)
• Dynamic Binding Table Counts – Displays the number of IP addresses in the
source-guard binding table.
• Current Dynamic Binding Table – Displays the IP addresses in the source-guard
binding table.
Web – Click IP Source Guard, Dynamic Information.
Figure 3-71 Dynamic IP Source Guard Binding Information
CLI – This example shows how to configure a static source-guard binding on port 5
Console#show ip source-guard binding
MacAddress
----------------- --------------- ---------- -------------------- --------
11-22-33-44-55-66 192.168.0.99
Console#
3-114
IpAddress
Lease(sec) Type
0 Static
.
4-154
VLAN Interface
1 Eth 1/5