Hanna Instruments HI 98188 Instruction Manual page 37

GENERAL PARAMETER SCREENS
Select Profile
Focus on the Select Profile item.
Press Select.
The list with memorised profiles is displayed.
Press Add to add a new profile to the list (max 10).
Use the Arrow keys to focus on the desired profile.
Press Select to select the profile and exit to Setup.
Press View to view profile information.
The profile information includes the date and the time when the profile was
added, information about calibration on EC and NaCl range, the setup cell
constant, information about temperature setting reference temperature, tem-
perature compensation mode, temperature coefficient, temperature source
and information about fixed ranges.
If calibration exists, the GLP functional key is displayed. Press GLP EC to view
the corresponding GLP EC information.
Press GLP NaCl to view the corresponding GLP NaCl information.
Note: If the EC or NaCl calibration was not performed while the current profile
is set, or calibration was cleared, the corresponding GLP key is not
displayed.
37