Hanna Instruments HI 98188 Instruction Manual page 10

EC range
The conductivity range is from 0 to 400 mS/cm . The actual conductivity range
(the uncompensated conductivity) is up to 1000 mS/cm. The instrument will
display conductivity readings up to 1000 mS.
Note: The symbol in front of the temperature reading means that the
temperature can be entered by the user (Manual option selected in
Setup, or temperature out of range).
Resistivity range
The reciprocal of the conductivity of a material is the resistivity.
TDS range
A conductivity measured value can be corrected to a total disolved solids value
using the TDS factor.
Salinity
The salinity is derived from the conductivity of a sample.
Salt % range
The percent of salinity in a sample is depending of the sample and on the
salinity coefficient.
10