Setting The Clock Functions - Electrolux EOB9956XAX User Manual

20 www.electrolux.com
Menu item
Elapsed Time

7.15 Setting the clock functions

When you use the core
temperature sensor, the
functions Duration and End
do not operate.
You can change the time and date when
you touch the clock on the display, when
the appliance is active.
1. Go to menu: Heating Functions.
2. Set the heating function and the
temperature.
3. Touch
Menu item
Lamp On / Off
Child Lock On / Off
Screen Lock
Heat + Hold
Set + Go
7.17 Heat + Hold
The function keeps prepared food warm
at 80 °C for 30 minutes. It activates after
the baking or roasting procedure ends.
or go to the menu: Timers.
Description
Show, hide or reset the timer that counts up
when pressing the start button. The elapsed
time is only available while the oven is active.
4. Choose a clock function.
5. Scroll the list to set the necessary
time. Wait a few seconds for the time
to set itself automatically or touch to
confirm: h or min. You can delete the
settings if you touch: x.
When the clock function ends, an
acoustic signal sounds and a message
comes on the display. You can stop or
extend the cooking process.
7.16 Submenu for: Options
Further individual settings related to
safety, convenience and oven lamp.
Description
Switch the oven lamp on or off.
Once activated it locks the screen and all but‐
tons. They remain locked both in ON and OFF
positions. To unlock touch the display and fol‐
low instructions. If unlocked you need to lock it
again via menu.
Screen lock temporarily 'locks' the touch screen
and all buttons except the power key. To unlock
touch the display and follow instructions.
Heat + Hold is only available when a duration is
set. The oven will not completely switch off au‐
tomatically but keep the food warm for 30 mi‐
nutes. It is not available for all programmes. If
active, an icon is shown on the display.
Set+Go lets you set an oven function with dura‐
tion to use it later by only touching the screen.
The screen lock is active when the cooking
process starts.
The function is visible in the menu only when
the duration is set.