Gear Shifting
DTS PANEL MOUNT REMOTE CONTROL
IMPORTANT: Never shift outboard into gear unless engine speed is at idle. Do
not shift outboard into forward or reverse when the engine is not running.
•
The outboard has three gear shift positions to provide operation: Forward
(F), Neutral (N), and Reverse (R).
•
When shifting, always stop at neutral position and allow the engine speed
to return to idle.
•
Panel mount remote control requires the operator to always press shift
lock while moving the control handle out of the neutral position.
•
Advance the control lever to further increase speed.
DTS CONSOLE MOUNT REMOTE CONTROL
IMPORTANT: Never shift the outboard into gear unless the engine speed is at
idle. Do not shift the outboard into forward or reverse when the engine is not
running.
eng
OPERATION
N
F
81
R
3427
3428