4. Remove the power trim fill cap. The fill cap only requires 1/4 turn to
remove.
a
5. The fluid level should be approximately 25 mm (1 in.) from the top of the
fill neck. Add Quicksilver or Mercury Precision Lubricants Power Trim and
Steering Fluid. If not available, use automotive automatic transmission
fluid (ATF).
Tube Ref
Description
No.
Power Trim and
114
Steering Fluid
6. Install the power trim fill cap. Tighten fill cap 1/4 turn. Cap will snap in
place. Do not tighten beyond this point.
MAINTENANCE
b
a -
b -
c -
d -
c
d
29312
Where Used
Power trim system
108
Tilt support lever
Power trim fill cap
Tilt support bracket
Pedestal
Part No.
92-858074K01
eng