Using The Accessories - AEG BS9314001M User Manual

6. You can change the weight at any
time. Use the shuttle to change the
weight.
7. When the time ends, an acoustic
signal sounds. Press any symbol to
deactivate the signal.

10. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
10.1 Core temperature sensor
The core temperature sensor measures
temperature inside the food. When the
food is at the set temperature, the
appliance deactivates.
There are two temperatures to be set:
• the oven temperature (minimum 120
°C),
• the food core temperature.
CAUTION!
Use only the core
temperature sensor supplied
and the original replacement
parts.
Directions for the best results:
• Ingredients should be at room
temperature.
• Core temperature sensor cannot be
used for liquid dishes.
• During cooking the core temperature
sensor must remain in the dish and
the plug in the socket.
• Use recommended food core
temperature settings. Refer to "Hints
and tips" chapter.
The appliance calculates an
approximate end of cooking
time. It depends on the
quantity of food, the set
oven function and
temperature.
Food categories: meat, poultry
and fish
1. Activate the appliance.
2. Insert the tip of the core temperature
sensor into the centre of meat or fish,
in the thickest part if possible. Make
With some programmes turn
over the food after 30
minutes. The display shows a
reminder.
sure that at least 3/4 of the core
temperature sensor is inside of the
dish.
3. Put the plug of the core temperature
sensor into the socket located in the
front frame of the appliance.
The display shows the core temperature
sensor symbol.
4. Use the shuttle in less than 5 seconds
to set the food type.
5. Set a heating function and, if
necessary, the oven temperature.
6. To change the food core
temperature, press
When the dish reaches the set
temperature, an acoustic signal sounds.
The appliance deactivates automatically.
7. Touch any symbol to stop the signal.
ENGLISH 17
.