Measured Value (Mv) - ABB COM600 Series User Manual

3.4.8.15.
42
COM600 series, Version 5.0
DNP 3.0 Serial Master (OPC) User's Manual

Measured value (MV)

Table 3.4.8.15-1 Configurable MV properties
Property/ Para- Value or Value range/ Default
meter
Basic
Common Data MV
Class
Addresses
Index -1 to 65535
Default: -1
Sub-Type
Subtype Simple
Data Class Spe-
cific
Indication Object Analog input (30, 32)
Analog output (40)
Default: Analog input (30, 32)
Scale and Unit
Multiplier Default: Deka
Phase Number of Default: 0
Decimals
Scale Default: None
Unit Default: Dimensionless
Limit Value Super-
vision
Max
Min
Table 3.4.8.15-2 Additional configurable properties for Sub-Type MV Limit Check
Property/ Para- Value or Value range/ Default
meter
Sub-Type MV Limit Check
Limit Value Super-
vision
High Default: 0
Description
Common data class according to IEC
61850.
Indication index.
MV Sub-type
Data object number for indication.
Specifies the multiplier for current SI unit.
Specifies the number of decimals shown
in HSI. (0..9)
Scale used with this type
SI unit for measurement as described in
IEC 61850
Maximum value for measurement
Minimum value for measurement
Description
MVSubTypeDescription
High limit for measurement. Event is cre-
ated when value crosses the limit.
1MRS756567