Cybersecurity Disclaimer - ABB NETA-21 User Manual

The services can be disabled as follows:
Service
ABB Netconfig Setting –> Network services –> Services –> Firewall
settings
FTP Setting –> Network services –> Services –> Firewall
settings
FTPS Setting –> Network services –> Services –> Firewall
settings
HTTP Setting –> Network services –> Services –> Firewall
settings
Modbus/TCP Setting –> Network services –> Services –> Firewall
gateway settings
PC tool gateway Settings –> Device interfaces –> Panel bus –> Settings
NTP Settings –> Locale –> Date and time
Network Time protocol settings

Cybersecurity Disclaimer

This product is designed to be connected to and to communicate information and data via
a network interface. It is Customer's sole responsibility to provide and continuously ensure
a secure connection between the product and Customer network or any other network (as
the case may be). Customer shall establish and maintain any appropriate measures (such
as but not limited to the installation of firewalls, application of authentication measures,
encryption of data, installation of anti-virus programs, etc) to protect the product, the
network, its system and the interface against any kind of security breaches, unauthorized
access, interference, intrusion, leakage and/or theft of data or information. ABB and its
affiliates are not liable for damages and/or losses related to such security breaches, any
unauthorized access, interference, intrusion, leakage and/or theft of data or information.
Navigation
Program features 49
Action
Clear the check box of the
desired network interface.
Clear the check box of the
desired network interface.
Clear the check box of the
desired network interface
Clear the check box of the
desired network interface
Note: HTTP protocol can
be disabled only if HTTPS
port setting has the default
value 443.
Clear the check box of the
desired network interface.
Set Ethernet GW to
Disable.
Set Time source to Manual
or External.
Replace public NTP server
address with a local server
address.