Table of Contents
Advertisement
Scan 1001 is available in the following versions:
Scan 1001 BB
(black glass decor, black trim, and black glass handle)
Scan 1001 WB
(white glass decor, black trim, and black glass handle)
Scan 1001 BC
(black glass decor, matt chrome trim, and clear glass handle)
Scan 1001 WC
(white glass decor, matt chrome trim, and clear glass handle)
Installation
The house owner is responsible for ensuring that all necessary natio-
nal and local safety measures are observed during installation and
fitting and also responsible for observing the fitting and operating
instructions detailed in this manual.
When you install any kind of fireplace or stove, you must inform the
local authorities. You are also responsible for calling in a chimney
sweep to inspect and authorize the installation.
To ensure best-possible functionality and safety for your installation,
we advise you to call a professional fitter. Our Scan Dealer will be able
to recommend a qualified fitter in your area. For information on Scan
Dealers, please go to www.scan.dk..
Test in compliance with EN 13229
CO Emission at 13% O 2
CO Emission at 13% O 2
Dust @ 13% O 2
No x @ 13% O 2
Efficiency
Nominel output
Chimney temperature EN 13229
Amount of smoke
Sub-pressure EN 13229
Recommended sub-pressure in connecting piece
Required combustion air supply
Fuel
Fuel consumption
Amount of fuel
T E C H N I C A L D ATA
Scan 1001
Safety
Any changes made to the product by the dealer, installer or user
could result in the product and safety functions not functioning
as intended. The same applies to the fitting of accessories or extra
equipment not supplied by Scan A/S. This could also be the case if
parts that are necessary for the operation and safety of the stove are
dismantled or removed.
Technical data and dimensions
Materials: ................................. Steel plate, galvanised sheet, Vermicolite,
Chamotte, Robax glass
Surface treatment: ........................................................................... Senotherm
Max. wood length: ..................................................................................... 50 cm
Weight Scan 1001: ................................................................................ ca. 107 kg
Connecting piece internal diameter: ............................................... 144 mm
Connecting piece external diameter: .............................................. 148 mm
Approval type: ................................................................ Intermittent fuelling
Intermittent fuelling means normal use of a woodstove. In other
words, you should let the fire die down until only the embers are left,
before refuelling.
The Scan 1001 was build in compliance with the homologized product
type specified in the Assembly- and Instructions Manual provided
with the product.
The EC declaration of conformity is available from www.scan.dk
Technical data
0,07
879
12
42
82
7
220
7,4
12
16 - 18
19,8
2,2
1,7
3
Unit
%
mg/Nm 3
mg/Nm 3
mg/Nm 3
%
kW
°C
g/sek
Pa
Pa
Nm 3 /h
Wood
kg/h
kg
Advertisement
Table of Contents
