Ruby Tech GS-2224L User Manual page 57

to the transmitting device(s) if the receiving port is too busy to handle.
When it is set Disable, there will be no flow control in the port. It drops
the packet if too much to handle.
Maximum Frame:
This module offer 1518~9600 (Bytes) length to make the long packet.
Excessive Collision Mode:
There are two modes to choose when excessive collision happen in half-
duplex condition as below:
Discard: The "Discard" mode determines whether the MAC drop frames
after an excessive collision has occurred. If set, a frame is dropped after
excessive collisions. This is IEEE Std 802.3 half-duplex flow control
operation.
Restart: The "Restart" mode determines whether the MAC retransmits
frames after an excessive collision has occurred. If set, a frame is not
dropped after excessive collisions, but the backoff sequence is restarted.
This is a violation of IEEE Std 802.3, but is useful in non-dropping half-
duplex flow control operation.
Description:
Description of device ports can not include " # % & ' + \.
47